Drywall Repair: How to Repair Drywall
Drywall Repair: How to Repair Drywall
Steps
Step one
Clean hole with blade knife. Cut at associate angle that the exterior of the opening is larger than the inside.
Step two
Fill the opening with painter’s putty. build it level with the wall surface.
Step three
Let it dry. Once dry, gently sand the world till sleek.
Step four
Spackle over the putty. you'll have to be compelled to repeat this step.
Step five
For medium holes, use a drywall metal patch.
Step half dozen
Sand the surface sleek round the hole.
Step seven
Wipe off dirt.
Step eight
Peel paper backing off the patch. Firmly press patch in situ with mesh facing outward.
Step nine
Spread drywall compound over the patch, feather out the perimeters. rid and let dry.
Step ten
Gently sand surface till sleek with the wall. Repeat step nine and ten till the patch will not be detected.
Step eleven
Larger holes want patches made from drywall. make certain it's a similar thickness because the drywall already gift.
Step twelve
Cut a sq. of drywall slightly larger than the opening. Score one facet with a blade knife and snap it apart. Cut the rear of the break line.
Step thirteen
Draw a top level view of the patch round the hole employing a pencil.
Step fourteen
Check for electrical cords and plumbing lines wherever you propose the cut.
Step fifteen
Use a drywall saw to chop out the drawn space.
Step sixteen
Screw in 2 wood boards behind the drywall, one at the highest and one at the lowest of the opening. this can keep the patch from falling through.
Step seventeen
Screw the drywall patch to the wood boards.
Step eighteen
Spread drywall compound and add mesh.
Step nineteen
Sand space and repeat steps eighteen and nineteen till the patch is undetectable.
Step twenty
Paint over once it’s dry.
To more clearly be able to watch the following video
Source : http://www.planitdiy.com
